[sammy848]

Looking for like new brake lever with intact pivot mount, and attached plunger which engages the brake cylinder. Dont need the rubber boot or mater cylinder assembly but open to options if thats all that is availble.

I made the mistake of trying to undo the plunger and forgot to remove the 1.5mm allen set screw holding the plunger in place and shitted mine.

Cheers

[duckilover]

Replaced my brake and clutch but don't recall getting the levers back so if they are available (I'll ask my dealer) you can have it. They are working on my bike right now so remind me in a few days

[sammy848]

Originally Posted by duckilover

Replaced my brake and clutch but don't recall getting the levers back so if they are available (I'll ask my dealer) you can have it. They are working on my bike right now so remind me in a few days

hey duckilover... cool but if you swapped your levers out for CRG's like mine you need to reuse the plunger but CRGs come with a new a pivot shaft for their own lever. I had an offer from another member who put on ASV's and wondering do they include their own plunger to engage the brake?

I really only need the OE lever pivot plus the plunger threaded into it. I'm really only looking for those but understand many would want to sell with the levers.

[duckilover]

I put Brembos (RCS) on both sides; pretty sure, but not positive, it was complete?

Originally Posted by sammy848

hey duckilover... cool but if you swapped your levers out for CRG's like mine you need to reuse the plunger but CRGs come with a new a pivot shaft for their own lever. I had an offer from another member who put on ASV's and wondering do they include their own plunger to engage the brake?

I really only need the OE lever pivot plus the plunger threaded into it. I'm really only looking for those but understand many would want to sell with the levers.

[sammy848]

Originally Posted by duckilover

I put Brembos (RCS) on both sides; pretty sure, but not positive, it was complete?

yah RCS are the best and of course a complete change so you have just the parts I need ... I'm gonna do the RCS when I get some HP billet calipers for my 848 maybe next year. Spending my money on suspension this year.

[duckilover]

OK so hit me up in a bit, I'm sure the dealer has them, OEM parts, for you. They are moving so maybe lost, who knows...I'll ask

edit: I'm in ON by the way so won't be an effort if I actually have them. I need to start paying attention to who has what, geesh...they aren't here so must be with my dealer...in theory:S

[mookie10]

is this what you are looking for?

[sammy848]

Originally Posted by mookie10

is this what you are looking for?

yah looks similar.. the pivot nut looks different though, lever from a different bike? It may be what Im looking for if its the same spe as used on the stock setup. Sometimes these plungers are different lenghts.

[mookie10]

This lever is from a 2009 1198s, the plunger looks to be 3/4 inch in length

[sammy848]

Originally Posted by mookie10

This lever is from a 2009 1198s, the plunger looks to be 3/4 inch in length

Mookie, how much you asking for it?